Power Quality Analyzers
Available in stock
Brochure NanoVIP® TWO PLUS™ 540 kb 267 downloads
Power Quality Analyzer with MRH ™ Technology, including 4 independent channels...
NanoVIP® TWO PLUS™
Portable power quality analyzer
NanoVIP® TWO PLUS™ is a modern, compact and powerful portable Power Quality analyzer for professional use; it can be used on single-phase, two-phase, three-phase balanced networks, low and medium voltage as well as on chillers and pumping system to monitor all performance parameters.
In addition to its electrical channels, it has 4 sensor channels to read whichever type of transducer: 4..20mA, 0..1V or PT to monitor and store data of whichever system.
Thanks to the MRH™ hardware onboard, it can be connected to a QUADRA measuring network as a DGP device.
A long lasting battery and the huge logging capability of data (over 1 year) are distinguishing characteristics that make it an absolute reliable and unique professional tool.
Any energy measurement,
easiness of use
- Light, handy, multilingual, with performance and features at the top of its class
- LCD graphic display that allows wide flexibility in the (multilingual menu, waveforms, histograms, personalized pages, drawings, diagrams, pictures, etc.)
- PC Software NanoStudio dedicated through which you can make advanced analysis of the data stored on uSD
- 1 voltage measuring channel (1 phase + neutral) up to 600V CAT III, with the possibility to also measure the DC voltage, with the precision of the 0,25% + err.FS
- 1 current input with the possibility to also measure the DC current, with the precision of the 0,25% + err.FS
- 4 available transducer channels (4..20mA, 0..1V, PT)
- 4 preloaded efficiency modes: chiller, pump, supply and sensors
- Automatic verification of the correctness of the device connected to the network
- Possibility to use flexible current probe up to 3000A or other captors with full scale set by the user
- High capacity batteries that allow a range of campaign more than 24 hours even in the absence of mains power; no country limit when connected to the network
- 20 alarms (generic, swells, dips and interruptions)
- Energy Measurement in 4 time zones (rates) set
Fields of use
The NanoVIP® TWO PLUS™ is an handy tool, compact and light aimed at give a huge range of uses thanks to 4 transducers channel and MRH™ technology installed on the same device. It can be used as a Power Quality analyzer but it can also measure mechanical systems and monitor any parameter via transducer.
NanoVIP® TWO PLUS™ allows in an easy and intuitive way:
- to control the loads, consumption and the associated network costs
- to check in service the correct dimensioning of plants
- to prevent the risk for overheating and insulation failures due to high harmonic content
- to make a full Power Quality analysis
- measure machineries realtime efficiency; preloaded modes: chiller, pump, supply and sensors
- read and store measures collected by up to 4 transducers (4..20mA, 0..1V or PT)
- participate to a QUADRA network as a DGP client device.
- Identify the presence of harmonics, outages, overloads or potentially harmful voltage dips for machinery and equipment
- Intercept fluctuations and rapid changes in current and voltage signals
- Measure the inrush currents of motors and electrical machinery
| Standard | IEC61000-4-30 Class S |
| Dimensions | 203x116x53mm |
| Safety | 600V CAT III |
| Protection degree | IP30 |
| Weight | 580g. |
| Display type | LCD dot matrix with backlight |
| Languages | English- Spanish – Italian – German – French |
| Communication | USB to PC |
| Onboard memory | 64kB |
| External memory | Micro SD (4GB supplied) |
| Working temperature range | from -10 to +55 °C |
| Umidity | Max 95% |
| External power supply | Wall-plug switching, input 100-240VAC ±10% 47-63Hz, changeable plug; output 7,5VDC – 12W |
| Battery | 4 x AA MiMh 2100mAh |
| Autonomy | >24h (wireless off) |
| Single phase/Double phase networks | yes |
| Three phase 4 wires, balanced networks | yes |
| Three phase 3 wires, balanced networks | yes |
| Three phase 4 wires, unbalanced networks | no |
| Three phase 3 wires, unbalanced networks | no |
| Non electrical measures | Yes, up to 4 sensors |
| Power analisys | V, I, P, Q, S, F, PF, THD(V)%, THD(I)%, cosj, j, peaks, min, max, mid, max. demand, ecc. |
| Counters | kWh, kVArh, kVAh (used and generated) |
| Waves shape | V e I |
| Harmonics | Values and spectrum up to 50° |
| Sags | Dips, swells and net interruption |
| Transitory | Overcurrent and overtension |
| Test EN 50160 | yes |
| Starting currents | yes |
| Measurements in DC | yes |
| K factor | Up to 25° |
| Alarms | Video |
| Alarms logs | 5 on video |
| Hourly tarifs | up to 4 |
| Consumption costs | yes |
| Measurement campaign | Unlimited, up to SD completition |
| Display data refres | 1 sec. |
| Voltage (TRMS) | 1 input channel 4MOhm, 2 scales |
| Current (TRMS) | 1 input channel 10kOhm |
| Power | Active, reactive and apparent. Single phase and total |
| Energy counters | kWh, kvarh, kVAh |
| Non electrical measures | Yes, up to 4 independent |
| Harmonics analisys | Up to 50° |
| EN50160 analisys | from 500mS up |
| Transitional analisys | Overcurrent, overvoltage and starting currents |
| CE conformity | 93/68/CEE (B.T. electrical materials); |
| 89/336/CEE e 2004/108/CE (EMC) | |
| 2006/95/CE – 72/23/CEE (LVD – Low voltages); | |
| 2002/95/CE (RoHS – Dangerous materials restrictions); | |
| 2002/96/CE e 2003/108/CE (WEEE/RAEE – Wasted electrical and electronics materials). | |
| Safety | EN 61010-1 |
| EMC | EN 61326 |
| EN 61326/A1 | |
| EN 61326/A2 | |
| EN 61326/A3 | |
| Temperature | IEC 60068-2-1 (working) |
| IEC 60068-2-2 (storage) | |
| Vibrations | IEC 60068-2-6 |
| Umidity | IEC 60068-2-30 (umidity) |
| Overload | IEC 60947-1 |
| 4NAN2PN | NANOVIP/TWO PLUS WITHOUT CLAMP |
| 4NANP2 | NANOVIP/TWO PLUS WITH NANOFLEX CLAMP 400mm 3kA |
| 4NAN2PA | NANOVIP/TWO PLUS WITH CLAMP CT 200A/1VAC |
| 4NAN2PB | NANOVIP/TWO PLUS WITH CLAMPS 1x200A + 1x3kA |
| 4NAN2PC | NANOVIP/TWO PLUS WITH CLAMPS 1x200A + 1x5A |
| 4NAN2PD | NANOVIP/TWO PLUS WITH CLAMPS 1x200A + 1x1000A |
| 4NAN2PE | NANOVIP/TWO PLUS WITH CLAMPS 1x1000A |
| PART | Quantity | Standard/Option |
| NanoVIP TWO PLUS | 1 | Standard |
| Battery pack | 1 | Standard |
| Voltage cables | 2 | Standard |
| Voltage captor | 1 | Standard |
| Crocodiles | 2 | Standard |
| Magnetic voltage captors | 2 | Standard |
| PT 1000 transducers | 2 | Standard |
| Cable for 4..20mA transducers | 2 | Standard |
| Cable for 0..1V transducers | 2 | Standard |
| mSD 4Gb | 1 | Standard |
| mSD adaptor | 1 | Standard |
| External power supply + adapters | 1 | Standard |
| Bag | 1 | Standard |
| Carton box | 1 | Standard |
| Calibration certificate | 1 | Standard |
| AC Current probes | 1 or more | Option – According to package |
| DC Current clamp | 1 or more | Option – According to package |
