UltraFlex rogowski current sensor
Brand new UltraFlex™ rogowski current sensor is now available for NanoVIP® power quality analyzers; standard Elcontrol current range with Rogowski coils extends now from 6A up to 6000 A, with coils lengths from 40cm up to 80cm.
With UltraFlex™ rogowski NanoVIP accessories range improves adding an high performance tool
UltraFlex™ is provided as standard for a maximum current of 6000A and 60cm coil length; it is characterized by a very high, stable precision and, of course, it is automatically recognized by any NanoVIP® power quality analyzers of latest generation.
Brochure Rogowski current sensor UltraFlex™ 400 kb 126 downloads
Rogowski current sensor for currents up to 6000A and 600mm coil length ...UltraFlex™ can be supplied with customized current range (up to 15000A) as wella as a customized coil length: ask for a quotation at sale@elcontrol-energy.net
| Measured range | 6000A (optionally higher currents can be provided) |
| Operating voltage | 600V rms or DC (CAT IV) 1000V rms or DC (CAT III) |
| Voltage at sensor terminals (2) | 19,55µV/A at 50Hz on 10kΩ load |
| Accuracy | ≤ 2% |
| Frequency range | approximately 8 Hz to 20 kHz the range depends on the coil length |
| Test voltage | 7400 Vrms / 1 min |
| SAFETY | |
| Electrical safety | EN61010-1, EN61010-031, EN61010-2-031, EN61010-2-032 standards |
| (1) Conditions of reference | 23 °C ± 2 °C, 20% to 75% RH Position of conductor measured: centred in the measurement coil Shape of measurement coil: quasi-circular Measurement instrument input impedance (oscilloscope) ≥ 1 MΩ Frequency and form of signal measured: 40 to 400 Hz sinusoidal |
| (2) Output levels | The Rogowski coil output is proportional to the rate of change of current. The calculation formula is: Ampere rms x Hertz x K x 10-6, where K depends on manufacturing. The K value is 2 for 100 mV model and 0.8 for 40 mV model. |
Recommended Posts
